Dyna-Fresh AQC Air Quality Control Center

Duro Dyne Technical Service also has extended on call service hours. Between the hours of 7:00 am - 8:00 am and 5:00 pm - 7:00 pm, please call 1-800-899-3876, select option #4 and leave a detailed message with your name, number, and the reason for your call. A technician will respond to your call within 15-20 minutes.

When tightly insulated homes have windows and doors shut, stale air is sealed in and fresh air is sealed out. Fresh air provides a healthier home and work environment. The key to eliminating moisture, bacteria, carbon monoxide and household odors is bringing fresh air indoors. The Dyna-Fresh Air Quality Control System brings outdoor air inside to make a more comfortable and healthy environment. The key component is a control panel which draws air into the home or workplace at pre-determined intervals with a 24 volt timer or manual override for continuous fresh air flow. The fresh air is drawn in through a motorized round damper. This fresh air is mixed with the indoor air already inside the heating / cooling system. The mixture is now circulated through the ductwork while stale air is vented out through an existing ventilation (such as a bathroom exhaust fan).

CONSTANT ENERGY CONSERVATION emphasis and local building code changes over the past several years have resulted in efforts to make buildings and homes more weather tight and draft free. While these efforts have been successful, eliminating outside air leakage has created another potential problem; air quality of the interior atmosphere.

Many provincial and local governments have become concerned that the relatively stagnant indoor air is showing increasing levels of carbon monoxide and carbon dioxide. Many provinces have required periodic introduction of outdoor air into the indoor environment. The Dyna-Fresh Air Quality Control Center coupled with a model NSPRD024 or SPRD110 Spring Return Damper was designed for this purpose.

Duro Dyne Model Aqc-1 Manual Rating: 6,8/10 4841 reviews The ComfortMax System incorporates such features as Master thermostat zone monitoring and override, economy mode, 5+1+1 setback, manual or auto.
Duro Dyne Canada Inc. Is a control panel which draws air into the home or workplace at pre-determined intervals with a 24 volt timer or manual override for continuous fresh air flow. The fresh air is drawn in through a motorized round damper. The Dyna-Fresh Air Quality Control Center coupled with a model NSPRD024 or SPRD110.

Fresh air is drawn in from the outside and mixed with return air to be distributed by the air handling equipment.
The Dyna-Fresh AQC Control Panel coordinates the blower, exhaust fan and damper to introduce fresh air and remove stale air at user selectable 15 minute intervals.
Stale air is exhausted by the independent exhaust fan.

CONTROL CENTER

Duro Dyne Model Aqc-1 Manual Download

The Dyna-FreshAQC has a programmable (in 15 minute intervals) 24 hour timer which is wired to control a DuroZone Spring-Return Damper (110 volt or 24 volt), an exhaust fan, and the air handler fan. Once the timer has been programmed, a call from the Dyna-Fresh AQC for fresh air will:

Open the Spring Return Damper to allow fresh air into the return duct
Turn on the air handler fan to distribute the fresh air into the home
Activate an exhaust fan to remove the stale air in the home or office

Features:

Listed to UL and CSA Standards for Safety
24 Hour clock timer
Programmable in 15 minute intervals
Controls either a 24V or 110V Spring Return Damper
Eliminates the need for a low voltage transformer to power the Fresh Air Damper
Installs quickly
Compact design
Manual override switch for continuous fresh air

Item No.	Code	Description
35220	AQC	Air Quality Control Center

The AQC-1 Air Quality ControlCenter, item #35220

Hanword full crack. Programmable 24-hour, 15 minute interval timer
Eliminates use of low voltage transformer for fresh air damper
Controls a 24 or 110 volt damper

4 Position Dampers

All DuroZone Zoning Dampers, (RD, MSand MB series), are available with a 4 position motor. The four possible positions are: fully open, 2/3 open, 1/3 open and closed. These dampers aretraditionally used for fresh air intake.

Note: To order a damper with a fourposition motor, change the first two digits of the item number to 38. i.e.: AnRD-6 Round Damper, item #35039 would be item #38039.

An FAS-4 Fresh Air Damper Switch#35066 is required for operation and is included with each 4 position damper.

Replacement Motors for Fresh Air Four Position Dampers
Item No.	DESCRIPTION
35107	RMMP13 Motor for 4 positions fresh air RD & MS series
35109	RMMP34 Motor for 4 positions fresh air MB series

Replacement Motors for Spring Return Dampers
Item No.	DESCRIPTION
35105	Nhl 09 download free. MSSR024 24 volts motor for SPMS with Mid-Torque motor + NSPRD024 series
35141	RMSR024 24 volt motor for SPRD024 series
35142	RMSR110 110 volt motor for SPRD110 series
For a replacement motor of a discontinued damper, contact our customer service at (514) 422-9760.

How to play legend of zelda ocarina of time on mac. Switch
Item No.	DESCRIPTION